Jan-6th-2009
A lamp partaking of the characteristics of both arc and incandescence; a lamp in which the imperfect contact of two carbon electrodes produces a part of or all of the resistance to the current which causes incandescence. The usual type of these lamps includes a thin carbon rod which rests against a block of carbon. [...]
Posted in L-Lamination by: ELECTRICAL DICTIONARY -- No Comments -- ReadMore
Jan-6th-2009
A number of lamps mounted on a board or other base, and connected to serve as voltage indicator or to show the existence of grounds, or for other purposes.
Posted in L-Lamination by: ELECTRICAL DICTIONARY -- No Comments -- ReadMore
Jan-6th-2009
An arc lamp adapted to be used, a number in series, upon the same circuit. The electric regulating mechanism is placed in shunt or in parallel with the carbons and arc. (See Lamp, Arc.)
Posted in L-Lamination by: ELECTRICAL DICTIONARY -- No Comments -- ReadMore
Jan-6th-2009
A lamp connected to a dynamo, and used by its degree of illumination to show when the dynamo on starting becomes excited, or builds itself up.
Posted in L-Lamination by: ELECTRICAL DICTIONARY -- No Comments -- ReadMore
Jan-6th-2009
A special type of arc light. It is adapted for use in a lighthouse dioptric lantern, and hence its arc has to be maintained in the same position, in the focus of the lenses. The lamps are so constructed as to feed both carbons instead of only one, thereby securing the above object.
Posted in L-Lamination by: ELECTRICAL DICTIONARY -- No Comments -- ReadMore
Jan-6th-2009
A three filament lamp is used for three phase currents. It has three filaments whose inner ends are connected, and each of which has one leading-in wire. The three wires are connected to the three wires of the circuit. Each filament receives a current varying in intensity, so that there is always one filament passing [...]
Posted in L-Lamination by: ELECTRICAL DICTIONARY -- No Comments -- ReadMore
Jan-6th-2009
An electric lamp in which the light is produced by heating to whiteness a refractory conductor by the passage of a current of electricity. It is distinguished from an arc lamp (which etymologically is also an incandescent lamp) by the absence of any break in the continuity of its refractory conductor. Many different forms and [...]
Posted in L-Lamination by: ELECTRICAL DICTIONARY -- No Comments -- ReadMore
Jan-6th-2009
A unit of commercial supply of electric energy; the volt-coulombs required to maintain an electric lamp for one hour. A sixteen-candle power incandescent lamp is practically the lamp alluded to, and requires about half an ampere current at 110 volts, making a lamp-hour equal to about 198,000 volt-coulombs. [Transcriber's note: 0.55 KW hours.]
Posted in L-Lamination by: ELECTRICAL DICTIONARY -- No Comments -- ReadMore
Jan-6th-2009
A lamp designed for use alone upon its own circuit. These have the regulating mechanism in series with the carbon and arc, so that the whole current goes through both. (See Lamp, Arc.) Synonym–Monophote Lamp.
Posted in L-Lamination by: ELECTRICAL DICTIONARY -- No Comments -- ReadMore
Jan-6th-2009
An arc lamp, the regulation of the distance between whose carbons depends on the differential action of two separate electrical coils. The diagram illustrates the principle. The two carbons are seen in black; the upper one is movable, The current arrives at A. It divides, and the greater part goes through the low resistance coil [...]
Posted in L-Lamination by: ELECTRICAL DICTIONARY -- No Comments -- ReadMore